|
|
|
Performance Polyurethane Early Style General Motors MOTOR MOUNTS- in CHROME or ZINC finish
For specific vehicle applications–please see the next / following pages. If your application is not listed in the vehicle listings, use the diagrams and dimensions shown just below and your vehicle motor and / or transmission mounts must be carefully measured before ordering.
|
|
|
Short & Wide Type
|
Early Style General Motors Performance Polyurethane MOTOR MOUNTS
Two Types- short & wide and tall & narrow are available, and in two finishes:
Short & Wide Type:
#3.1114 has a zinc finish and HYPER-FLEX™ performance polyurethane.
#3.1115 has a chrome finish and HYPER-FLEX™ performance polyurethane.
See diagram at left.
Inside Width- 2 5/8"
Height Base to Bolt Center- 1 3/4"
Replaces O.E. part numbers: 3990914, 3960768, 6258154
Replaces aftermarket numbers: 2267, 2285, 2142
This type / size chrome motor & transmission mount set is #3.1133.
This type / size zinc finish motor & transmission mount set is #3.1120.
NOTE: MUST USE SUPPLIED BASEPLATE.
|
|
|
Tall & Narrow Type
|
Tall & Narrow Type:
#3.1117 has a zinc finish and HYPER-FLEX™ performance polyurethane.
#3.1118 has a chrome finish and HYPER-FLEX™ performance polyurethane.
See diagram at left.
Inside Width- 2 3/8"
Height Base to Bolt Center- 2 3/16"
Replaces O.E. part numbers: 3962740, 3990918, 3962748
Replaces aftermarket number- 2283
This type / size chrome motor & transmission mount set is #3.1134.
This type / size zinc finish motor & transmission mount set is #3.1122.
NOTE: MUST USE SUPPLIED BASEPLATE.
|
|
|
|
Clam Shell Style General Motors Performance Polyurethane MOTOR MOUNTS made of HYPER-FLEX™ performance polyurethane.
NOTE: CUSTOMER WILL BE SUPPLIED WITH INSERT ONLY! Customer must reuse existing outer metal shell and drill.out the welds/rivets to separate them for installation of the new inserts.
DESIGNED TO REUSE THE STOCK 7/16" THROUGH BOLT.
#3.1116 4 Bolt Style. to replace the inserts of the following GM type mounts: 14039437, 9762326, 467422, 10001132, 10001133, 9764714, 459021 and aftermarket part number 2292.
#3.1121 3 Bolt Style. to replace the inserts of the following GM type mounts: 15731260, 15529451, 15529452, 15592505, 22145334 and aftermarket part number 2412.
|
|
|
|
General Motors Style Performance Polyurethane TRANSMISSION MOUNTS
#3.1108 has a zinc finish (shown) and HYPER-FLEX™ performance polyurethane.
#3.1132 has a chrome finish and HYPER-FLEX™ performance polyurethane.
Has a built-in patented metal safety interlock design for high performance applications and for added confidence from breakage.
See diagram at left.
Dimensions: for #3.1108 & #3.1132 only:
Total Height- 1.937"
Base Mounting Dimensions- 3 3/4" min. to 4 1/4" max. using 3/8" bolts
Top Mounting Dimensions- 1 1/2" center to center using 7/16".14 bolts
NOTE: WHEN INSTALLING- YOU MUST USE SUPPLIED BASEPLATE.
NOTE TO CUSTOM CHASSIS FABRICATORS:
The dimensions shown are for reference only. You should obtain the mounts before final fabrication of your particular chassis area.
Patent No. 5,551,661, 5,788,206 and 5,788,207
|
|
|
|
TRANSMISSION MOUNT
for General Motors Trucks & SUVs
#3.1129 has a zinc finish and HYPER-FLEX™ performance polyurethane.
For specific vehicle applications, please see the following truck motor & transmisison mount pages ( 7 or 8 ) .
Has a built-in patented metal safety interlock design for performance applications and for added confidence from breakage.
Patent No. 5,551,661, 5,788,206 and 5,788,207
|
|
|
 |
TRANSMISSION MOUNT
for General Motors Trucks & SUVs
#3.1106 has a zinc finish
For specific vehicle applications, please see the following truck motor & transmisison mount pages ( 8 ) .
Made of heavy duty metal construction and famous HYPER-FLEX™ performance polyurethane. |
|
